Quantity Each
£64.49 £71.49 approx 10% off
Please select one of the buttons below.
BR Operating Maintenance Crane (R60077)
< Click here for more details >
< Click here for less details >
The breakdown crane is as much a part of railway infrastructure as much as it is a wagon. Such cranes began to appear in 1875, growing in size and complexity.
Over 176 cranes have appeared around the UK since their introduction, with the most modern cranes able to lift entire locomotives off the ground. Being the national operator from 1948 BR inherited a patchwork of rolling stock from its constituent companies, as they had done twenty five years earlier, including all breakdown cranes in service.
BR employed some of the largest rail cranes, with the heaviest of the lot designed for the heaviest of tasks, such as the re-railing of locomotives, or tasks that may see a locomotive needing to be removed from the track all together
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£44.99 £49.99 approx 10% off
Please select one of the buttons below.
GWR Loriot Y Machinery Truck (R60100)
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£34.49 £38.49 approx 10% off
Please select one of the buttons below.
LMS "Salmon" Bogie Wagon (R60202)
< Click here for more details >
< Click here for less details >
The LMS, being the largest of the Big Four railway companies, was behind a great number of freight wagons, including some of the first large bogie flat wagons. British Rail, when they took charge of the UK national rail network chose an aquatic theme for their freight wagons, and as such the LMS bogie flat design would come to be called the Salmon. Salmon wagons were designed to carry lengths of rail and later, track panels.
The 65 foot length of the wagon enabled them to easily carry standard 60 foot lengths of track and consists of up to ten of these wagons would be connected to enable the transportation of even longer lengths.Batches of these wagons, totalling 894 examples, would be constructed between 1949 and 1961 with a further batch built in 1983.
Almost all of these batches would see a rebuild at various points in time with items such as the bogies and bolster positions changing and the addition of rail cranes and end bolsters on some variants. Each different variant would receive a different TOPS code.
LMS Salmon wagons were the earliest type built, they were fitted with bolsters on wooden planked decks. Wagons of this specification would usually be used independently and would therefore be a part of a mixed consist, this would mean that they would be unfitted in terms of brakes other than a hand brake on their early type bogies. Wagons of this type would be limited to 40mph or 50mph depending on use.
The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory bag can be fitted to represent the different ways these wagons would have appeared.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£34.49 £38.49 approx 10% off
Please select one of the buttons below.
BR YMO "Salmon" Bogie Wagon (R60203)
< Click here for more details >
< Click here for less details >
The LMS, beImage courtesy of Paul Bartletting the largest of the Big Four railway companies, was behind a great number of freight wagons, including some of the first large bogie flat wagons. British Rail, when they took charge of the UK national rail network chose an aquatic theme for their freight wagons, and as such the LMS bogie flat design would come to be called the Salmon.Salmon wagons were designed to carry lengths of rail and later, track panels.
The 65 foot length of the wagon enabled them to easily carry standard 60 foot lengths of track and consists of up to ten of these wagons would be connected to enable the transportation of even longer lengths.Batches of these wagons, totalling 894 examples, would be constructed between 1949 and 1961 with a further batch built in 1983.
Almost all of these batches would see a rebuild at various points in time with items such as the bogies and bolster positions changing and the addition of rail cranes and end bolsters on some variants. Each different variant would receive a different TOPS code.
YMO Salmons were the first to be classified by BR. YMOs were unfitted as per the earlier LMS counterparts Many YMOs would see their bolsters removed entirely to enable the transportation of pre-built track panels.
The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory bag can be fitted to represent the different ways these wagons would have appeared.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£34.49 £38.49 approx 10% off
Please select one of the buttons below.
BR YMO "Salmon" Bogie Wagon (R60204)
< Click here for more details >
< Click here for less details >
The 65 foot length of the wagon enabled them to easily carry standard 60 foot lengths of track and consists of up to ten of these wagons would be connected to enable the transportation of even longer lengths. Batches of these wagons, totalling 894 examples, would be constructed between 1949 and 1961 with a further batch built in 1983.
Almost all of these batches would see a rebuild at various points in time with items such as the bogies and bolster positions changing and the addition of rail cranes and end bolsters on some variants. Each different variant would receive a different TOPS code.
YMO Salmons were the first to be classified by BR. YMOs were unfitted as per the earlier LMS counterparts Many YMOs would see their bolsters removed entirely to enable the transportation of pre-built track panels.
The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory bag can be fitted to represent the different ways these wagons would have appeared
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£34.49 £38.49 approx 10% off
Please select one of the buttons below.
BR YMO "Salmon" Bogie Bolster Wagon (R60205)
< Click here for more details >
< Click here for less details >
The LMS, being the largest of the Big Four railway companies, was behind a great number of freight wagons, including some of the first large bogie flat wagons. British Rail, when they took charge of the UK national rail network chose an aquatic theme for their freight wagons, and as such the LMS bogie flat design would come to be called the Salmon. Salmon wagons were designed to carry lengths of rail and later, track panels.
The 65 foot length of the wagon enabled them to easily carry standard 60 foot lengths of track and consists of up to ten of these wagons would be connected to enable the transportation of even longer lengths.Batches of these wagons, totalling 894 examples, would be constructed between 1949 and 1961 with a further batch built in 1983.
Almost all of these batches would see a rebuild at various points in time with items such as the bogies and bolster positions changing and the addition of rail cranes and end bolsters on some variants. Each different variant would receive a different TOPS code.
YMO Salmons were the first to be classified by BR. YMOs were unfitted as per the earlier LMS counterparts Many YMOs would see their bolsters removed entirely to enable the transportation of pre-built track panels.
The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£34.49 £38.49 approx 10% off
Please select one of the buttons below.
BR YMA "Salmon" Bogie Wagon (R60206)
< Click here for more details >
< Click here for less details >
The LMS, being the largest of the Big Four railway companies, was behind a great number of freight wagons, including some of the first large bogie flat wagons. British Rail, when they took charge of the UK national rail network chose an aquatic theme for their freight wagons, and as such the LMS bogie flat design would come to be called the Salmon. Salmon wagons were designed to carry lengths of rail and later, track panels.
The 65 foot length of the wagon enabled them to easily carry standard 60 foot lengths of track and consists of up to ten of these wagons would be connected to enable the transportation of even longer lengths. Batches of these wagons, totalling 894 examples, would be constructed between 1949 and 1961 with a further batch built in 1983.
Almost all of these batches would see a rebuild at various points in time with items such as the bogies and bolster positions changing and the addition of rail cranes and end bolsters on some variants. Each different variant would receive a different TOPS code.
YMA Salmons were the result of a BR rebuild, with wagons entering the workshops then leaving with shiny new air brakes. The fitment of these brakes allowed the wagons to be run in larger consists and also allowed for the removal of the rear coupled brake van, therefore reducing the staff required for a freight service.
The Hornby Salmon range is a new tooling for 2023 with almost all variants of the wagon catered for. Fitted with diecast chassis, these wagons have fantastic weight that rolls freely on metal wheels. Bolsters are included in the accessory bag can be fitted to represent the different ways these wagons would have appeared
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£25.49 £28.49 approx 10% off
Please select one of the buttons below.
Railiner PVA Van (R60216)
< Click here for more details >
< Click here for less details >
The PVB is a type of rail van introduced in the mid 1980s in limited numbers. While variations existed the main build of the wagon remained the same, a curtain sided private owner wagon with air or vacuum brakes. Being that the vans were curtain sided similar to a road transport trailer, they often carried the liveries of the company that they worked for. Wagons would have a working capacity of around 31 tonnes. Much of the fleet would be purchased by the Ministry of Defence when they fell out of use as a domestic freight wagon.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£25.49 £28.49 approx 10% off
Please select one of the buttons below.
Campbells Soups Limited PVA (R60217)
< Click here for more details >
< Click here for less details >
The PVB is a type of rail van introduced in the mid 1980s in limited numbers. While variations existed the main build of the wagon remained the same, a curtain sided private owner wagon with air or vacuum brakes. Being that the vans were curtain sided similar to a road transport trailer, they often carried the liveries of the company that they worked for. Wagons would have a working capacity of around 31 tonnes. Much of the fleet would be purchased by the Ministry of Defence when they fell out of use as a domestic freight wagon.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£22.99 £25.49 approx 10% off
Please select one of the buttons below.
BR Engineering ZBA "Rudd" "DB972154" (R60222)
< Click here for more details >
< Click here for less details >
The ZBA 'Rudd' is a type of low sided open wagon rebuilt from an older HTV type of coal hopper. This rebuild was done on behalf of the BR Civil Engineering department, the department responsible for maintaining the trackwork of the UK.
The ZBA was the most extreme of these rebuilt wagons with an entirely new body fitted as opposed to having the original one cut down. The first of these rebuilds began appearing in 1984, with the wagons becoming the longest lasting type. ZBA wagons saw their withdrawal come thick and fast around 2008, with their use diminished by advancements in wagon design in the 30 years they were in service.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 1st Quarter
Quantity Each
£22.99 £25.49 approx 10% off
Please select one of the buttons below.
BR Engineering ZBA "Rudd" "DB972606" (R60223)
< Click here for more details >
< Click here for less details >
The ZBA 'Rudd' is a type of low sided open wagon rebuilt from an older HTV type of coal hopper. This rebuild was done on behalf of the BR Civil Engineering department, the department responsible for maintaining the trackwork of the UK.
The ZBA was the most extreme of these rebuilt wagons with an entirely new body fitted as opposed to having the original one cut down. The first of these rebuilds began appearing in 1984, with the wagons becoming the longest lasting type. ZBA wagons saw their withdrawal come thick and fast around 2008, with their use diminished by advancements in wagon design in the 30 years they were in service.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 1st Quarter
Quantity Each
£58.49 £64.99 approx 10% off
Please select one of the buttons below.
GWR Loriot Y Machinery Truck With Load No. 2 (R60238)
< Click here for more details >
< Click here for less details >
Under the GWR telegraphic code, flat wagons that were designed to transport heavy machinery, carried on the tradition of animal names by being called ‘Loriot’. The first wagon was in service from 1892.
Design for the ‘Loriot’ wagons evolved into incorporating sloping ramps at either end which enabled the machinery to be loaded and unloaded quickly and efficiently. Previous versions featured low, wide wells and no end ramps.
A new wagon in the series, ‘Loriot Y’, was constructed in 1937 to Diagram G39 and its number was No. 41989. An update to the design included ‘I’ beam girders rather than rolled beams and end axle guard plates.
No. 41990 (DW41990 under BR) was the second Loriot Y wagon to be constructed in 1939. The wagon conveyed excavators and other plant machinery over the GWR network. During the Second World War, the two wagons were used constantly to transport bulldozers for when there was wartime bombing.
The ‘Loriot Y’ wagon model represents the prototypical wagon under BR ownership. The running number, DW41990, is emblazoned on the side. A wood grain print is used to replicate the wooden planks seen on the prototypical model. The model’s load is a BR Coles Crane, made by Corgi.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Each
£44.99 £49.99 approx 10% off
Please select one of the buttons below.
KFA Container Wagon With 2 x 20 Containers & 1 x 20 Tanktainer (R60239)
< Click here for more details >
< Click here for less details >
A KFA is a container flat wagon, commonly these are constructed using bogies reclaimed from other wagons such as TEA tankers. Built in Finland from the late 1980s, the KFA has become a mainstay of the modern rail network, able to haul standard sized intermodal shipping containers within the restricted loading gauge that has resulted from a continued reliance on a Victorian invention.
At just over 60 feet in length the KFA is able to accommodate a raft of different containers from the standardised range, which tend to use the two main sizes of 40 foot and 20 foot. Be it 3 twenty-foot containers or a twenty footer with forty footer, the KFA is able to haul them with ease.
The Hornby KFA wagon is fully diecast, with some separately fitted details on the chassis enhancing the level of detail achieved with what can sometimes be seen as quite a plain wagon. Studs on the chassis allow for the fitting of modular containers both included with the set and available separately. This KFA container wagon model has a load of two 20’ containers and one 20’ tanktainer.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 4th Quarter
Quantity Each
£33.49 £37.49 approx 10% off
Please select one of the buttons below.
BR Engineering YGB Seacow "DB980033" (R60242)
< Click here for more details >
< Click here for less details >
The design for the Fishkind coded ‘Seacow’ wagons were based on a 1903 design by the London and South Western Railway. A typical hopper wagon would have slab sides with 7 vertical ribs and three discharge chutes. These chutes were situated at the outside of each rail and in the centre. The end of the wagon featured three handwheels to control the chute doors.
A total of 128 wagons were constructed at Shildon Works in 1971. The last 28 wagons were intended for operating in the Southern Region and featured air brakes with a vacuum through pipe. Under BR TOPS, the 28 wagons were coded YGB and the Fishkind code ‘Seacow’. Between 1981 and 1982, 251 ‘Seacow’ wagons were constructed by both Shildon Works and Ashford Works.
These last batch of wagons largely followed the original 1903 design but featured different variations also. Hopper bodies were welded instead of rivetted, each vertical rib was formed of box sections instead of U-sections and there were more modern bogies. Throughout the 2000s, several ‘Seacow’ wagons were withdrawn from service, and some were purchased by heritage railway companies.
The ‘Seacow’ wagon model features box sections in the vertical ribs to reflect a later variation. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon in an MGR Hopper style. A handbrake wheel is also featured. This model comes complete in a BR Engineers livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£33.49 £37.49 approx 10% off
Please select one of the buttons below.
Mainline YGB Seacow "DB980115" (R60243)
< Click here for more details >
< Click here for less details >
The design for the Fishkind coded ‘Seacow’ wagons were based on a 1903 design by the London and South Western Railway. A typical hopper wagon would have slab sides with 7 vertical ribs and three discharge chutes. These chutes were situated at the outside of each rail and in the centre. The end of the wagon featured three handwheels to control the chute doors.
A total of 128 wagons were constructed at Shildon Works in 1971. The last 28 wagons were intended for operating in the Southern Region and featured air brakes with a vacuum through pipe. Under BR TOPS, the 28 wagons were coded YGB and the Fishkind code ‘Seacow’. Between 1981 and 1982, 251 ‘Seacow’ wagons were constructed by both Shildon Works and Ashford Works.
These last batch of wagons largely followed the original 1903 design but featured different variations also. Hopper bodies were welded instead of rivetted, each vertical rib was formed of box sections instead of U-sections and there were more modern bogies. Throughout the 2000s, several ‘Seacow’ wagons were withdrawn from service, and some were purchased by heritage railway companies.
The ‘Seacow’ wagon model features box sections in the vertical ribs to reflect a later variation. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon in an MGR Hopper style. A handbrake wheel is also featured. This model comes complete in a Mainline livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£33.49 £37.49 approx 10% off
Please select one of the buttons below.
EWS YGB Seacow "DB980220" (R60244)
< Click here for more details >
< Click here for less details >
The design for the Fishkind coded ‘Seacow’ wagons were based on a 1903 design by the London and South Western Railway. A typical hopper wagon would have slab sides with 7 vertical ribs and three discharge chutes. These chutes were situated at the outside of each rail and in the centre. The end of the wagon featured three handwheels to control the chute doors.
A total of 128 wagons were constructed at Shildon Works in 1971. The last 28 wagons were intended for operating in the Southern Region and featured air brakes with a vacuum through pipe. Under BR TOPS, the 28 wagons were coded YGB and the Fishkind code ‘Seacow’. Between 1981 and 1982, 251 ‘Seacow’ wagons were constructed by both Shildon Works and Ashford Works.
These last batch of wagons largely followed the original 1903 design but featured different variations also. Hopper bodies were welded instead of rivetted, each vertical rib was formed of box sections instead of U-sections and there were more modern bogies. Throughout the 2000s, several ‘Seacow’ wagons were withdrawn from service, and some were purchased by heritage railway companies.
The ‘Seacow’ wagon model features box sections in the vertical ribs to reflect a later variation. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon in an MGR Hopper style. A handbrake wheel is also featured. This model comes complete in an EWS livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£33.49 £37.49 approx 10% off
Please select one of the buttons below.
Civil Engineering YGH Sealion "DB982599" (R60245)
< Click here for more details >
< Click here for less details >
The design for the Fishkind coded ‘Sealion’ wagons were based on a 1903 design by the London and South Western Railway. A typical hopper wagon would have slab sides with 7 vertical ribs and three discharge chutes. These chutes were situated at the outside of each rail and in the centre. The end of the wagon featured three handwheels to control the chute doors.
A total of 128 wagons were constructed at Shildon Works in 1971 and 100 members of the batch were fitted with dual brakes. AFI vacuum brakes allowed for faster emergency braking. These dual brakes meant that at one end of the wagon, there was a small air brake cylinder, and at the other end were two larger cylinders for the vacuum brakes. Under BR TOPS, the wagon’s unique combination of brakes meant that it was coded YGH and coded as the Fishkind ‘Sealion’. A further 360 ‘Sealion’ wagons were constructed at Shildon Works between 1972 and 1974.
The ‘Sealion’ wagon model features box sections in the vertical ribs to reflect a later variation. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon in an MGR Hopper style. A handbrake wheel is also featured. This model comes complete in a BR Civil Engineering livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£33.49 £37.49 approx 10% off
Please select one of the buttons below.
BR YGH Sealion "DB982482" (R60246)
< Click here for more details >
< Click here for less details >
The design for the Fishkind coded ‘Sealion’ wagons were based on a 1903 design by the London and South Western Railway. A typical hopper wagon would have slab sides with 7 vertical ribs and three discharge chutes. These chutes were situated at the outside of each rail and in the centre. The end of the wagon featured three handwheels to control the chute doors.
A total of 128 wagons were constructed at Shildon Works in 1971 and 100 members of the batch were fitted with dual brakes. AFI vacuum brakes allowed for faster emergency braking. These dual brakes meant that at one end of the wagon, there was a small air brake cylinder, and at the other end were two larger cylinders for the vacuum brakes. Under BR TOPS, the wagon’s unique combination of brakes meant that it was coded YGH and coded as the Fishkind ‘Sealion’. A further 360 ‘Sealion’ wagons were constructed at Shildon Works between 1972 and 1974.
The ‘Sealion’ wagon model features box sections in the vertical ribs to reflect a later variation. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon in an MGR Hopper style. A handbrake wheel is also featured. This model comes complete in a BR livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£33.49 £37.49 approx 10% off
Please select one of the buttons below.
Loadhaul YGH Sealion "DB982587" (R60247)
< Click here for more details >
< Click here for less details >
The design for the Fishkind coded ‘Sealion’ wagons were based on a 1903 design by the London and South Western Railway. A typical hopper wagon would have slab sides with 7 vertical ribs and three discharge chutes. These chutes were situated at the outside of each rail and in the centre. The end of the wagon featured three handwheels to control the chute doors.
A total of 128 wagons were constructed at Shildon Works in 1971 and 100 members of the batch were fitted with dual brakes. AFI vacuum brakes allowed for faster emergency braking. These dual brakes meant that at one end of the wagon, there was a small air brake cylinder, and at the other end were two larger cylinders for the vacuum brakes. Under BR TOPS, the wagon’s unique combination of brakes meant that it was coded YGH and coded as the Fishkind ‘Sealion’. A further 360 ‘Sealion’ wagons were constructed at Shildon Works between 1972 and 1974.
The ‘Sealion’ wagon model features box sections in the vertical ribs to reflect a later variation. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon in an MGR Hopper style. A handbrake wheel is also featured. This model comes complete in a Loadhaul livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Each
£26.99 £29.99 approx 10% off
Please select one of the buttons below.
LNER NE Scottish Area Hopper "773103" (R60248)
< Click here for more details >
< Click here for less details >
25-ton steel ballast hopper wagons were specially constructed for the LNER Engineer’s Department to transport the ballast. At the bottom of the wagon, there were three hopper doors that were operated by the wheels at the platform end. As the train was being pulled forward, the outer doors would open and discharge in the ‘six foot’ on both sides of the track. The centre door would open into the ‘four foot’. The ballast plough brakes would then spread the ballast.
This NE Scottish Area Hopper wagon model features box sections in the vertical ribs. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon. A handbrake wheel is also featured. A legend stating ‘Empty to Cowlairs’ reflects these wagons emptying their ballast load at Cowlairs. This model comes complete in an LNER NE Scottish Area livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 4th Quarter
Each
£26.99 £29.99 approx 10% off
Please select one of the buttons below.
BR Trout Ballast Hopper "DB992039" (R60249)
< Click here for more details >
< Click here for less details >
Most BR departmental (non-revenue earning wagons) were provided with aquatic codes and these were known as the Fishkind. Aquatic names enabled the operating staff to allocate resources to jobs. The ballast hopper wagon designated ‘Trout’ by BR had its origins in the 1920s.
Two batches of BR ‘Trout’ wagons were constructed by Metropolitan-Cammell Ltd. to Diagram 1/580. DB992035-56 were constructed at Lot 2118 between May and June 1949. These BR ‘Trout’ wagons featured a side and centre discharge for ballast and were unfitted.
This ‘Trout’ Ballast Hopper wagon model features box sections in the vertical ribs. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. Stanchions support the wagon. A handbrake wheel is also featured. This model comes complete in a BR livery.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 4th Quarter
Quantity Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
27T Iron Ore Tippler Wagon British Rail (R60250)
< Click here for more details >
< Click here for less details >
An iron ore tippler wagon was an all-steel mineral wagon that did not have doors. Each wagon featured heavier axleboxes for carrying iron ore. The wagons could be turned over for unloading at its destination, the steelworks.
The British Iron & Steel Foundation proposed that a 27-ton tippler wagon could be introduced into traffic and provided extensive tabular details as justification. Differences between the ironstone hopper wagon and the 27-ton tippler wagon featured very minor dimensional changes and the fitting of self-contained buffers. Some iron ore tippler wagons were intended for chalk traffic, but an exact number is not known.
A ZKV Zander wagon is used to represent transporting iron ore on the BR network. The model comes complete in a bauxite livery to represent one of the numerous ZKV Zander wagons that were unpainted. Each vertical rib has box sections.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
21T Steel Mineral Wagon C GWR "25504" (R60256)
< Click here for more details >
< Click here for less details >
Coal haulage in South Wales was streamlined and made more efficient by GWR introducing the 21-ton mineral wagon in the 1920s. A few decades later, the 21-ton mineral wagon served an essential purpose in the early stages of British Railways control over the new national railway network.
This wagon is liveried in a Stephenson & Clarke eye-catching pale green. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. It features diecast spoked wheels.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 4th Quarter
Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
21T Steel Mineral Wagon C BR Loco "DM750586" (R60257)
< Click here for more details >
< Click here for less details >
The 21-ton mineral wagon served an essential purpose in the early stages of British Railways control over the new national railway network. These wagons were essentially coal wagons, the logical evolution of the old 3 – 7 plank wagon designs of the grouping era.
These wagons were used for industrial scale coal transportation, with long trains of these being one of the only ways of transporting coal from the coalfields in the quantities required to keep the British steam train fleet running.
These wagons were of all steel construction with common yet uprated leaf springs to accommodate the load weight these would commonly haul. These wagons were fitted with side doors, to aid in the ease and speed of unloading the cargo.
This wagon is liveried in a BR black livery with an eye catching legend in yellow of ‘LOCO’ on the side. The hook couplings enable easier coupling of other rolling stock and locomotives on your layout. It features diecast spoked wheels.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 4th Quarter
Quantity Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
Hornby 2024 Wagon (R60261)
< Click here for more details >
< Click here for less details >
Commemorate your memories of 2024 with the annual Hornby wagon. Smartly liveried in a bold maroon, the wagon also features the iconic Hornby logo well-known in Britain and around the world. This year, the annual Hornby wagon is in the form of a Coke Hopper wagon.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 2nd Quarter
Quantity Each
£26.99 £29.99 approx 10% off
Please select one of the buttons below.
Christmas Wagon 2024 (R60262)
< Click here for more details >
< Click here for less details >
Get into the festive spirit and treat yourself with this 2024 Hornby Christmas wagon. Featuring a vivid green livery, it is reminiscent of a real Christmas tree by the fire. The wagon is also filled to the brim with wonderful presents. Celebrate the holidays by adding this wagon to your model railway collection.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
Hornby 70th Westwood 7 Plank Wagon 1954 - 2024 (R60263)
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
< Click here for more details >
< Click here for less details >
Freight duties of transporting coal was extremely common in the early days of the L&MR due to the sheer number of locomotives needing coal for fuel. Coal wagons were used instead for transportation as previously, separate coal containers would be loaded onto flat wagons and then unloaded at its destination. This process led to heavy wear and tear on both the flat wagon and the container. By 1833, this process was phased out.
The diminutive open-topped coal wagon is finished in an L&MR brown livery. The accessory bag contains two chain couplings.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter
Quantity Each
£17.99 £19.99 approx 10% off
Please select one of the buttons below.
L&MR Flatbed Wagon (R60276)
< Click here for more details >
< Click here for less details >
General goods vehicles, or 'Merchandise Waggons' of the later Stephenson period were simple four-wheeled platform vehicles with sprung 3' diameter wheels and were typically around 14' in length, 'with a superficial surface of platform area of seventy-five square feet' able to carry 'a considerable quantity of light goods' of 'about four tons weight.'
By 1841 dumb-buffers and coupling chains were fitted and as the decade progressed, the length of the waggons shortened and the width increased, creating a greater load area. The fitment of loose sides of around 2' in height allowed for the carriage of coal and loads were protected by canvas tarpaulins painted with the company initials to prevent their theft, with each waggon having its number, weight and gauge clearly marked in white paint on a black background.
As travel time by railway was superior to that of road travel by coach, coach companies sought new ways to compete, leading to mail coaches and stagecoaches being loaded onto the 'open carriage waggons' for onward travel to places such as Liverpool or Manchester. These connecting, or 'branch coaches' were to become the antecedent for the Branch Line railways of the future.
This flatbed wagon comes complete in a vibrant L&MR green livery. The accessory bag contains two chain couplings.
Pre order this item today with just a 10% deposit saving 10% on RRP Due in the 3rd Quarter